Netgear Router Login |

Connecting Two Routers on a Home Network

How To Connect Two Routers: Computer Networks are generally configured to use a single router. However, you might use a second router in a few situations, as outlined below:

You are adding to new wireless devices, and an upgrade must be performed.

Your home network has wireless access, but it is not sufficient to reach all spots in your home.

You need to network a wired device that is physically distant from the router present in your network.

You need fast and constant streaming of video and large network content. And would like to subnet the network, leaving other network areas unaffected by the heavy downloads.

If you have one of these requirements, then the following steps can guide you to introduce on how to connect two routers on your present home network.

To perform the initial configuration, place the router through a wired connection, close to a computer system on your network. This might not be the final location of your router. You can, however, move it to the desired space once the configuration is complete.

How To Connect Two Routers

How To Connect Two Routers – Basic Configuration

The following step is about connecting the second router, which might be either wired or wireless

1. Configuring a Second Wired Router – If you are to plug in a wired router, you must use an Ethernet cable to connect it to the first router. Specifically, you must connect one end of the Ethernet cable into the uplink port of the new router, also known as the ‘WAN’ or ‘Internet’ port. The other end of the cable can go into any of the free ports on the existing router, with the exception of the uplink port.

2. Configuring a Second Wireless Router – If you are to connect a wireless router, then you must connect it to the existing router with the help of an Ethernet cable. It is also possible to connect two home routers with the help of wireless access. This scenario makes the second one available as a wireless access point, rather than a router.

It is essential to note that the second router is configured in client mode. This allows the router to utilize the full range of capabilities that qualify it as a full-fledged router. It is obvious to know the right router login IP address to setup the initial configuration. The correct settings to perform such a configuration are available in the router documentation or associated manual.

Connecting Two Routers – Advanced Configuration

Further to the basic configuration, you might want to configure the second router to execute certain specialized functions on the network, as outlined below:

1. Using Two Wireless Routers – Whenever both routers used on a network are wireless, their Wi-Fi frequencies or channels might cause interference. This might manifest as network slowdowns or dropped connections. While using two wireless routers on the same network, you must make sure that you set up different ranges for channel settings. It might be an excellent idea to use channels 1 to 6 for the first router and channel 11 for the second router.

2. Configuring the Second Router as a Switch or Access Point – This is especially useful when incorporating printer or file sharing at home or small offices.

When you have to configure the second router as a network switch, each end of the Ethernet cable must be plugged into one of the free ports of the two routers involved, other than their uplink ports.

To configure the next router as an access point, you must follow the instructions present in the manual to set it in either the bridge or repeater mode.

Key Points about IP and DHCP Configuration

When performing the required configurations, you must note that regardless of whether the router is wired or wireless, you make the necessary changes to the second router’s IP address. This ensures that there is no conflict between the IP addresses on the network.

Further, you must also make sure the DHCP address range assigned to the second router is available. This should be within the address range available to the first router. If this does not happen automatically, you might have to reconnect each device and set the required ranges manually. This is our take on how to connect two routers on a home network. Let us know if you get any error while following this procedure through the comment section below.

Leave a Reply